How To Repair Acrylic Nails

Download Article

Download Article

Breaking a nail tin exist frustrating, especially if information technology is one of your acrylics. If you lot do non desire to pay to accept the nail stock-still at the salon, then you can always practice a dwelling house acrylic nail repair. The easiest way to do this is to buy a home acrylic nail kit. And then, you can utilize the kit to fix the broken nail and make it look like new again.

1. i

   Become an at-abode acrylic smash kit. A home acrylic nail kit will have everything that you need to repair a broken acrylic. You can purchase a home acrylic nail kit or purchase the materials yous volition need individually. You lot will demand:^[1]

   • Brush on gel
   • Acrylic powder
   • Setting spray
   • Nails
   • Cuticle stick
   • Boom file

2. 2

   Read and follow the instructions for your kit. If you purchase a kit, then information technology is important to read and follow the instructions that are included with it. Make sure that yous work in a well-ventilated area as well and follow any other safety precautions that are included with your product.^[2]

   Advertisement

3. 

   3

   Buff and file the broken boom. Use the buffing edge of a nail file or nail buffer to shine out the top of the blast you want to repair. This volition help to make the surface even for when y'all apply the new nail. Then, employ the file to fifty-fifty out the finish of the blast and smooth out whatsoever crude or jagged edges. Brand sure that you castor abroad any grit from the nail after you terminate buffing and filing.^[3]

   • Y'all can besides trim the nail if information technology is actually uneven or if it has a tear in information technology.
   • If the acrylic is still partly on, and then yous volition need to remove information technology the rest of the way before you can buff and file the blast. If it is loose plenty, then you might exist able to just pull it off. If the boom is withal fastened, you can soak the smash in pure acetone to loosen it.^[4] Try soaking a cotton ball in acetone and pressing it against the broken nail.
   • It is also best to apply acrylics to nails that are somewhat brusk, so you may need to trim down the natural boom if it is long.^[5]

4. 

   4

   Choose a nail tip that fits your nail. Sort through the acrylic nail tips to discover one that is similar to your natural boom. Attempt to choose a nail tip that fits well over your natural nail and that is not too wide or too narrow.^[6]

   • Articulate acrylic smash tips will look more natural than white tips.

5. 

   5

   Attach the smash tip with acrylic agglutinative gel. Apply a line of acrylic castor-on gel to the inside of the nail tip. Merely use the gel to the expanse that fits over your natural nail. So, place the nail tip over your natural nail and printing it into place.^[vii]

   • Apply business firm pressure level for virtually five seconds to ensure that the boom tip is secured in place.^[eight]

6. 

   half-dozen

   Cut and file the blast. Later the nail is secured, use pair of scissors or nail clippers to trim it down to the same length equally your other nails. Attempt to cut the nail straight across, but don't worry if it is non perfectly even at the end.^[9]

   • Next, file the nail into the same shape as your other nails.
   • Vitrify the top of the fake blast equally well to make it more even with your natural smash.

Advertisement

1. 

   1

   Employ a coat of the brush-on gel. After yous have filed the boom into the same shape as your other nails, utilise a coat of the castor on gel over your natural nail and over the acrylic nail tip. This will help to keep the nail in identify.^[ten]

   • You can apply the brush on gel just like a coat of nail polish. Kickoff near the cuticle and castor the gel out towards the nail tip. Do this a few times to cover the whole blast.

2. 

   2

   Dip the nail in acrylic powder. While the acrylic gel is still wet, dip your nail into the acrylic pulverisation. Make sure that yous dip your unabridged nail into the powder. This powder will bail with the nail and harden it even more than.^[eleven]

   • Information technology is okay if you go a little powder on your skin. You lot tin can only castor it off with your other fingers.

3. 

   3

   Use a cuticle stick to make clean around the edges of the nail. After you accept coated your unabridged nail in the acrylic powder, you lot volition demand to scrape away the excess gel and powder from the edges of your nail. Employ the cuticle stick to clean around the edges of your nail.^[12]

   • You tin also smooth away some of the excess powder on the nail with your fingertip.

4. 

   iv

   Echo the gel and powder two to three times. To ensure that your acrylic will stay in place, you will need to echo the process of applying gel and dipping the blast in pulverisation ii to iii times. Make sure that you make clean effectually the blast with the cuticle stick later each application of the powder.^[13]

   • Two to three coats of gel and powder should be plenty. Also much gel and powder could crusade the nail to seem unnaturally thick.

Advertisement

1. 

   1

   Spray on the gel activator. To fix the acrylic powder and gel, spray on two sprays of the gel activator. This will set the nail within a few seconds. Later on your use the spray on activator, the nail will be dry and difficult.^[xiv]

   • Spray the gel onto your whole blast, not just on the acrylic. Make sure that the spray covers all of the areas where you practical the gel and powder.

2. 

   2

   Shape the nail again. After your nail is set up, you can begin filing and shaping it again. This will allow you lot to smoothen away whatever rough edges caused by the acrylic gel and powder. Use a fine-edged file to smoothen you the edges of your nail.^[15]

   • Brand sure that you buff the top of the blast where the acrylic tip meets with your natural nail. In that location volition be a slight ridge, so buffing the nail is important to ensure that the nail looks natural.

3. 

   3

   Paint the nail. After you stop filing and buffing the smash, apply the smash polish of your choice to complete the repair.^[xvi] Cull a boom smoothen in the same color as the residue of your nails and apply two to three coats for even coverage.^[17]

   • Allow the blast smooth to dry completely before y'all touch anything.

Advert

Add New Question

• Question

  Can I super glue an acrylic nail back on?

  

  Mia Rubie is a Smash Creative person and the Possessor of Sparkle San Francisco, a nail studio based in San Francisco, California. She has over eight years of blast artist and management experience and is known for her push-the-envelope designs and creative eye for colors. Her clients include Sephora, Target, and Vogue. Her work has been featured in the San Francisco Chronicle and StyleCaster. She holds a BBA focusing on Entrepreneurial and Small Business Operations from San Francisco State Academy. Yous tin can detect her work on her Instagram business relationship @superflynails.

  

  Nail Artist

  Practiced Answer

  

  Support wikiHow by unlocking this expert answer.

  I really tin't recommend doing this. If yous have an acrylic smash fall off and you don't have the tools or time to practise it yourself, just go to a blast salon. A professional will practice a skilful task fixing the nail and it won't take super long for them to exercise it.

• Question

  I did my own acrylic nails at home with the stuff that y'all can purchase from the store and they are not clear and shimmery, how tin can I fix that?

  

  Some proficient advice would be to put information technology in nail polish removal that has gelatin in it. This is considering this will brand the smash translucent (clear). Along with that, put the nail in honey or anything of that consistency. Let them completely dry. When done drying information technology will be clear and shimmery/shiny, just also be used as a clear base coat which makes the colored nail polish y'all put over information technology last longer.

• Question

  How do I cease my nail after filing?

  

  Wash your hands to remove dust. Then pigment your nails with a base of operations coat, colour, and a top glaze, letting each coat dry thoroughly earlier moving to the next pace.

Show more than answers

Advertizement

Video

Things You'll Need

• A home acrylic boom kit
• Blast files and buffing pads
• Nail scissors or clippers
• Nail polish

Nigh This Article

Article Summary X

Breaking an acrylic nail tin can be frustrating, only y'all can replace it at abode with an acrylic nail kit. If your broken acrylic nail is still partially on your finger, remove it by soaking it in acetone. To attach your new acrylic nail, first vitrify and file your natural nail, then attach the replacement boom with adhesive gel. Cutting and file it downwards to match your other nails, apply a glaze of castor-on gel, then dip your nail into the acrylic powder. To make certain your acrylic will stay in place, echo the procedure of applying gel and dipping the nail in powder two-3 times. Use a cuticle stick to make clean around the edges of the nail later each application and so you don't become acrylic on your skin. Finally, spray on the gel activator from your kit, so file and shape your blast one last time. For more than tips, including how to paint your acrylic nail, read on!

Did this summary assist you lot?

Thanks to all authors for creating a page that has been read 52,314 times.

Did this article help you lot?

Source: https://www.wikihow.com/Fix-Acrylic-Nails

Share this post